![]() from the new handheld remote and multiple wall locations, including dimming), but you'd have to remove the existing remote system for this to work. This would also allow you to have full three-way control of the fan and light in the future (i.e. You can replace your existing remote control system with a remotely controllable wall-switch-type dimmer/fan control: Leviton makes a product in the Vizia RF line that could work, although you'd have to buy a matching Z-Wave remote as well if you're willing to live with having to point the remote at the dimmer, the Lutron Maestro IR could be used instead. (This has the advantage that you can upgrade your system to support dimming from the handheld remote.) ![]() You can get a wall remote control for your existing fan receiver - it does not look like the Hunter wall remotes support dimming the light from the remote, but your existing remote does not appear to be a dimming model anyway. There are three possibilities to do what you want: We can't recommend particular brands, they are changing too fast for a reco to stand the test of time. ![]() Obtain a module and compatible switches which have been made to work together. As such, your best bet is to junk all the random hardware, and select one smart-switch system that has the versatility to do what you need. That is because these things need to be engineered from the ground up to work together, or they just won't. The problem is, when you are trying to combine dissimilar control methods, it really makes things hard. As such, this is baked into the Building Codes. Cops need to see your son is holding a computer mouse. Firefighters need light to search for rescues. It's for guests, but it's also for First Responders. You're not allowed a secret memorized procedure only your family knows. You may notice that almost every room has a light switch in an expected location - this is so consistent that you can enter a totally new room and reach for where the switch probably is. ![]() Your installation violates the law as-it-is. This will give you local Control of the Light via the Wall Switch and then use the Remote for the Fan. The Load line of the Switch then connects Directly to the Light lead in the Fan, not on the remote unit, just put a Cap on the Light Lead coming off the Remote unit so when you accidentally press the Light button it won't short out things in the box. In the Fan you use the Bridged HOT from the Switch Box to connect to the remote unit, Connect Neutral and Ground and connect to FAN lead to the fan wire in the Fan. Then the Load is of the Switch goes up to the Fan. To go this route you would have your Incoming HOT (Black/line) branch in the Box, one will go up to the Fan, the other will go to the Switch. by a hard-wired wall switch and the remote, and the fan wired hot and controlled by the remote." sounds like your first option? You can Control the Light with the Dimmer hard wired switch and the Fan with the Remote, though you will need two HOT legs going to the Fan from the Switch box. You mentioned in your second choice: "light. If you want to use the Remote, then you have the issue of having to find it to turn everything on. I've attached pictures of the switch hardware that I'm working with (alternative suggestions welcomed).The fan, remote, and canopy receiver are all Hunter.I have access to the entire circuit, fan junction box, and wall switch from the ceiling/attic above.The current wiring is with 12/2 romex (with ground).So my second desire, which I hope is possible, is to have the light controlled (on/off/dim) by a hard-wired wall switch and the remote, and the fan wired hot and controlled by the remote. What I would like to do is have a wall switch that will turn the fan and light on and off separately, AND have the remote in the room that also has full control to turn the light and fan on and off, but I don't think that is possible. This is great, except for walking into the room when it is dark as I knock everything over searching for the remote. I currently have a remote and receiver in the canopy. And a pull chain is not an option or a feature of the fan. The room is large and with a high ceiling so getting up to change the fan setting and dimming the light is a pain. I have installed a ceiling fan/light in my living room where only a light fixture used to be.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |